3ASC25H203 DAPC100 ABB

The input terminals of Jiansi PLC are:GND terminal and X terminal,which supports all switch inputs.The selected switch needs to be of npn.no type and is normally open.

1.The connection method of the sensor:

①Magnetic sensor,2 wires,generally Blue(blue)is connected to GND,Brown(brown)is connected to X of the input end.

②Photoelectric sensor,3 wires,generally Blue(blue)is connected to GND,Black(black)is connected to X of the input end,and Brown(brown)is connected to 24v.

2.The travel switch,2 wires,the travel switch has no positive and negative poles,choose NO to connect one to the input terminal X,and choose the other to connect to GND.

Selection of switching power supply:preferably Taiwan Mingwei switching power supply,DC 24v output.

简思PLC输入端为：GND端和X端，支持所有的开关量输入，选取的开关需要是npn.no型的，常开。

1、感应器的接法：

①磁性感应器，2线，一般Blue（蓝色）接GND，Brown（棕色）接输入端的X。

②光电感应器，3线，一般Blue（蓝色）接GND，Black（黑色）接输入端的X，Brown（棕色）接24v。

2、行程开关，2线，行程开关没有正负极，选择NO一根接输入端X，选择另一根接GND。

开关电源的选取：最好是台湾明纬开关电源，直流24v输出。