The PLC digital/analog output table specifies how the digital output point or analog output channel operates when the CPU is in the STOP state.
This function is very important for some equipment that must keep moving and running,such as holding brakes,or some key valves.It is not allowed to stop the action when debugging the PLC,so it must be set in the output table of the system block.
PLC数字量／模拟量输出表规定的是当CPU处于停机(STOP)状态时，数字量输出点或者模拟量输出通道如何操作。
此功能对于一些必须保持动作、运转的设备非常重要，如抱闸，或者一些关键的阀门等，不允许在调试PLC时停止动作，就必须在系统块的输出表中进行设置。
Sorensen QRS Series Op/Service Manual
Sorensen QSA DUAL RAN Operating Manual
Mark Sorensen auto signed baseball Whitecaps Tigers
Christmas Jeremy & Kimberly Sorensen
Aisan Chevy Toyota Carburetor Nitrophyl Float 79 80 81
