Description
输出指令=
1、=输出指令是将继电器、定时器、计数器等的线圈与梯形图右边的母线直接连接，线圈的右边不允许有触点，在编程中，触点以重复使用，且类型和数量不受限制。
500A 10KW CAR AUDIO POWER AMPLIFIER 12VDC POWER SUPPLY
AC LINE BREAKER PANEL WIRING GROUND BOND BONDING TESTER
POWER LINE BUILDING WIRING GROUND BOND BONDING TESTER
O-20VDC 500A BOAT ELECTRICAL SYSTEM TESTER POWER SUPPLY
500A AC DC WIRING CONNECTOR BOND LOSS DETECTION TESTER
0-500A DC VAPOR DEPOSITION CRUCIBLE HEATER TEMPERATURE
